This page contains the complete list of POP2 namelist variables available. They are grouped
by categories designed to aid browsing. Clicking on the name of a variable will display descriptive
information. If search terms are entered in the text box below, the list will be condensed to contain
only matched variables.
Namelist Variable |
Type |
Group |
accel_file
File containing acceleration factors.
Default: Set by CESM scripts based on ocean grid
|
char*256 |
time_manager_nml |
allow_leapyear
Flag to allow leap years.
Default: .false.
|
logical |
time_manager_nml |
date_separator
Character to separate yyyy-mm-dd.
Default: "-"
|
char*1 |
time_manager_nml |
dt_count
Input count to determine tracer timestep.
Default: Set by CESM scripts based on ocean grid
|
integer |
time_manager_nml |
dt_option
Method to determine tracer timestep size.
Valid Values: 'auto_dt', 'steps_per_year', 'steps_per_day', 'seconds', 'hours'
Default: 'steps_per_day'
|
char*256 |
time_manager_nml |
dtuxcel
Factor to multiply MOMENTUM timestep.
Default: 1.0
|
real |
time_manager_nml |
fit_freq
Number of intervals / days into which full and half timesteps must exactly "fit".
Default: 1
|
integer |
time_manager_nml |
iday0
Initial start date and time (day).
Default: 2
|
integer |
time_manager_nml |
ihour0
Initial start date and time (hour).
Default: 0
|
integer |
time_manager_nml |
iminute0
Initial start date and time (minute).
Default: 0
|
integer |
time_manager_nml |
imonth0
Initial start date and time (month).
Default: 1
|
integer |
time_manager_nml |
impcor
Flag for implicit treatment of Coriolis terms.
Default: .true.
|
logical |
time_manager_nml |
isecond0
Initial start date and time (second).
Default: 0
|
integer |
time_manager_nml |
iyear0
Initial start date and time (year).
Default: 1
|
integer |
time_manager_nml |
laccel
Flag for acceleration.
Default: .false.
|
logical |
time_manager_nml |
runid
An identifier for the run.
Default: $CASENAME
|
char*256 |
time_manager_nml |
stop_count
Number of stop_option intervals before stop OR date (yyyymmdd) at which model stops.
Default: 1000
|
integer |
time_manager_nml |
stop_option
Specify how to determine stopping time.
Valid Values: 'never', 'eoy', 'eom', 'eod', 'nyear', 'nyears', 'nmonth', 'nmonths', 'nday', 'ndays', 'nstep', 'nsteps', 'date'
Default: 'nyear'
|
char*256 |
time_manager_nml |
time_mix_freq
Frequency of mixing.
Default: 17
|
integer |
time_manager_nml |
time_mix_opt
Option for time mixing (Matsuno or averaging).
Valid Values: 'matsuno', 'avg', 'avgbb', 'avgfit'
Default: 'avgfit'
|
char*256 |
time_manager_nml |
Namelist Variable |
Type |
Group |
history_contents
Filename for choosing fields for output in history file.
Default: Set by CESM scripts based on ocean grid
|
char*256 |
history_nml |
history_fmt
history_outfile format (binary or netCDF).
Valid Values: 'bin', 'nc'
Default: 'nc'
|
char*256 |
history_nml |
history_freq
Frequency of writing history files.
Default: 1
|
integer |
history_nml |
history_freq_opt
Units of history_freq (frequency of writing history files).
Valid Values: 'never', 'nyear', 'nmonth', 'nday', 'nhour', 'nsecond', 'nstep'
Default: 'never'
|
char*256 |
history_nml |
history_outfile
Root filename for history files.
Default: '$CASENAME.pop.hs'
|
char*256 |
history_nml |
movie_contents
Filename for choosing fields for output in movie file.
Default: Set by CESM scripts based on ocean grid
|
char*256 |
movie_nml |
movie_fmt
movie_outfile format (binary or netCDF).
Valid Values: 'bin', 'nc'
Default: 'nc'
|
char*256 |
movie_nml |
movie_freq
Frequency of writing movie files.
Default: 1
|
integer |
movie_nml |
movie_freq_opt
Units of movie_freq (frequency of writing movie files).
Valid Values: 'never', 'nyear', 'nmonth', 'nday', 'nhour', 'nsecond', 'nstep'
Default: 'never'
|
char*256 |
movie_nml |
movie_outfile
Root filename for movie files.
Default: '$CASENAME.pop.hm'
|
char*256 |
movie_nml |
Namelist Variable |
Type |
Group |
aidif
Time-centering parameter for implicit vertical mixing.
Default: 1.0
|
real |
vertical_mix_nml |
bckgrnd_vdc
Background value for diffusivity.
Default: 0.1
|
real |
vmix_rich_nml |
bckgrnd_vvc
Background value for viscosity.
Default: 1.0
|
real |
vmix_rich_nml |
bottom_drag
Drag coefficient for bottom drag.
Default: 1.0e-3
|
real |
vertical_mix_nml |
bottom_heat_flx
Bottom (geothermal) heat flux [W/m^2].
Default: 0.0
|
real |
vertical_mix_nml |
bottom_heat_flx_depth
Depth below which bottom heat is applied.
Default: 1000.0e2
|
real |
vertical_mix_nml |
const_vdc
Constant value for diffusivity.
Default: 0.25
|
real |
vmix_const_nml |
const_vvc
Constant value for viscosity.
Default: 0.25
|
real |
vmix_const_nml |
convect_diff
Tracer diffusion to use for convection.
Default: 10000.0
|
real |
vertical_mix_nml |
convect_visc
Viscosity to use for convection (momentum).
Default: 10000.0
|
real |
vertical_mix_nml |
convection_type
Method for convection.
Valid Values: 'adjustment', 'diffusion'
Default: 'diffusion'
|
char*256 |
vertical_mix_nml |
implicit_vertical_mix
Flag for computing vertical mixing implicitly in time.
Default: .true.
|
logical |
vertical_mix_nml |
lniw_mixing
Flag for using near inertial wave mixing.
Default: .false.
|
logical |
niw_nml |
nconvad
Number of times to convectively adjust.
Default: 2
|
integer |
vertical_mix_nml |
niw_boundary_layer_absorption
Fraction of near inertial wave energy absorbed in the boundary layer.
Default: 0.7
|
real |
niw_nml |
niw_energy_file
Input file for reading near inertial wave energy flux.
Default: Resolution-dependent
|
char*256 |
niw_nml |
niw_energy_file_fmt
niw_energy_file_fmt (binary or netCDF).
Valid Values: 'bin', 'nc'
Default: 'bin'
|
char*256 |
niw_nml |
niw_energy_type
Type (internal or external) for near inertial wave energy source.
Default: 'blke'
|
char*256 |
niw_nml |
niw_local_mixing_fraction
Fraction of near inertial wave energy available for mixing local to the generation region.
Default: 0.5
|
real |
niw_nml |
niw_mix_max
Maximum diffusivity for near inertial waves (cm^2/s).
Default: 100.0
|
real |
niw_nml |
niw_mixing_efficiency
Mixing efficiency (portion producing mixing rather than thermal heating).
Default: 0.2
|
real |
niw_nml |
niw_obs2model_ratio
Ratio between observed and modeled near inertial wave strength.
Default: 2.0
|
real |
niw_nml |
niw_vert_decay_scale
Vertical decay scale for turbulence (cm).
Default: 500.0e02
|
real |
niw_nml |
rich_mix
Coefficient for Richardson number term.
Default: 50.0
Note: You must specify both the variable name and namelist name if you change this variable in user_nl_pop2!
|
real |
vmix_rich_nml |
vmix_choice
Vertical mixing parameterization.
Valid Values: 'const', 'rich', 'kpp'
Default: 'kpp'
|
char*256 |
vertical_mix_nml |
Namelist Variable |
Type |
Group |
ah
Horizontal tracer mixing coefficient.
Default: 0.6e7
Note: You must specify both the variable name and namelist name if you change this variable in user_nl_pop2!
|
real |
hmix_del2t_nml |
ah
Horizontal tracer mixing coefficient.
Default: -0.2e20
Note: You must specify both the variable name and namelist name if you change this variable in user_nl_pop2!
|
real |
hmix_del4t_nml |
ah
Isopycnal diffusivity.
Default: 3.0e7
Note: You must specify both the variable name and namelist name if you change this variable in user_nl_pop2!
|
real |
hmix_gm_nml |
ah_bkg_bottom
Background horizontal diffusivity at k = KMT
Default: 0.0
|
real |
hmix_gm_nml |
ah_bkg_srfbl
Background horizontal diffusivity within the surface boundary layer.
Default: 3.0e7
|
real |
hmix_gm_nml |
ah_bolus
Thickness (GM bolus) diffusivity.
Default: 3.0e7
|
real |
hmix_gm_nml |
am
Horizontal momentum mixing coefficient.
Default: 0.5e8
Note: You must specify both the variable name and namelist name if you change this variable in user_nl_pop2!
|
real |
hmix_del2u_nml |
am
Horizontal momentum mixing coefficient.
Default: -0.6e20
Note: You must specify both the variable name and namelist name if you change this variable in user_nl_pop2!
|
real |
hmix_del4u_nml |
buoyancy_freq_filename
File name for the time-dependent buoyancy frequency (squared).
Default: '$RUNDIR/buoyancy_freq'
|
char*256 |
hmix_gm_nml |
buoyancy_freq_fmt
buoyancy_freq_filename format (binary or netCDF).
Valid Values: 'bin', 'nc'
Default: 'nc'
|
char*256 |
hmix_gm_nml |
c_para
Dimensionless Smagorinksi coefficient parallel to alignment direction.
Default: 8.0
|
real |
hmix_aniso_nml |
c_perp
Dimensionless Smagorinksi coefficient perpendicular to alignment direction.
Default: 8.0
|
real |
hmix_aniso_nml |
const_eg
Unitless tuning parameter.
Default: 1.2
|
real |
hmix_gm_nml |
diag_gm_bolus
Flag for diagnostic bolus velocity computation.
Default: .true.
|
logical |
hmix_gm_nml |
efficiency_factor
Efficiency factor: must be between 0.06 and 0.08 [inclusive].
Default: 0.07
|
real |
mix_submeso_nml |
gamma_eg
Effective upper limit for inverse eddy timescale (unitless).
Default: 500.0
|
real |
hmix_gm_nml |
hmix_alignment_choice
Direction that breaks isotropy.
Valid Values: 'flow', 'east', 'grid'
Default: 'east'
|
char*256 |
hmix_aniso_nml |
hmix_momentum_choice
Type of horizontal momentum mixing.
Valid Values: 'del2', 'del4', 'anis', 'gent'
Default: 'anis'
|
char*256 |
hmix_nml |
hmix_tracer_choice
Type of horizontal tracer mixing.
Valid Values: 'del2','del4','gent'
Default: 'gent'
|
char*256 |
hmix_nml |
hor_length_scale
Constant horizontal length scale in cm (if luse_const_horiz_len_scale=.true.).
Default: 5.0e5 (5 km)
|
real |
mix_submeso_nml |
kappa_depth_1
1 of 2 parameters for variation of KAPPA with kappa_type_depth option.
Default: 1.0
|
real |
hmix_gm_nml |
kappa_depth_2
1 of 2 parameters for variation of KAPPA with kappa_type_depth option.
Default: 0.0
|
real |
hmix_gm_nml |
kappa_depth_scale
Depth scale for variation of KAPPA with kappa_type_depth.
Default: 150000.0
|
real |
hmix_gm_nml |
kappa_freq_choice
Frequency of KAPPA computation.
Valid Values: 'never', 'every_time_step', 'once_a_day'
Default: 'once_a_day'
|
char*256 |
hmix_gm_nml |
kappa_isop_choice
Choice for KAPPA_ISOP (isopycnal).
Valid Values: 'cons', 'depth', 'vmhs', 'hdgr', 'drad', 'bfre', 'bfvm', 'bfhd', 'bfdr', 'edgr'
Default: 'bfre'
|
char*256 |
hmix_gm_nml |
kappa_max_eg
Maximum value for KAPPA (cm^2/s).
Default: 2.0e7
|
real |
hmix_gm_nml |
kappa_min_eg
Minimum value for KAPPA (cm^2/s).
Default: 0.35e7
|
real |
hmix_gm_nml |
kappa_thic_choice
Choice for KAPPA_THIC (thickness).
Valid Values: 'cons', 'depth', 'vmhs', 'hdgr', 'drad', 'bfre', 'bfvm', 'bfhd', 'bfdr', 'edgr'
Default: 'bfre'
|
char*256 |
hmix_gm_nml |
lauto_hmix
Flag to internally compute mixing coefficient.
Default: .false.
Note: You must specify both the variable name and namelist name if you change this variable in user_nl_pop2!
|
logical |
hmix_del2t_nml |
lauto_hmix
Flag to internally compute mixing coefficient.
Default: .false.
Note: You must specify both the variable name and namelist name if you change this variable in user_nl_pop2!
|
logical |
hmix_del2u_nml |
lauto_hmix
Flag to internally compute mixing coefficient.
Default: .false.
Note: You must specify both the variable name and namelist name if you change this variable in user_nl_pop2!
|
logical |
hmix_del4t_nml |
lauto_hmix
Flag to internally compute mixing coefficient.
Default: .false.
Note: You must specify both the variable name and namelist name if you change this variable in user_nl_pop2!
|
logical |
hmix_del4u_nml |
lsmag_aniso
Flag to use nonlinear Smagorinski viscosities (c_para/perp and u_para/perp) rather than input anisotropic viscosities (visc_para/perp).
Default: .false.
|
logical |
hmix_aniso_nml |
lsubmesoscale_mixing
Flag for submesoscale mixing.
Default: .true.
|
logical |
hmix_nml |
luse_const_horiz_len_scale
Flag to use constant horizontal length scale given by hor_length_scale rather than varying length scale with space and time.
Default: .false.
|
logical |
mix_submeso_nml |
lvariable_hmix
Flag to enable spatially-varying mixing.
Default: .false.
Note: You must specify both the variable name and namelist name if you change this variable in user_nl_pop2!
|
logical |
hmix_del2t_nml |
lvariable_hmix
Flag to enable spatially-varying mixing.
Default: .false.
Note: You must specify both the variable name and namelist name if you change this variable in user_nl_pop2!
|
logical |
hmix_del2u_nml |
lvariable_hmix
Flag to enable spatially-varying mixing.
Default: .false.
Note: You must specify both the variable name and namelist name if you change this variable in user_nl_pop2!
|
logical |
hmix_del4t_nml |
lvariable_hmix
Flag to enable spatially-varying mixing.
Default: .false.
Note: You must specify both the variable name and namelist name if you change this variable in user_nl_pop2!
|
logical |
hmix_del4u_nml |
lvariable_hmix_aniso
Flag to allow spatially variable anisotropic viscosity.
Default: .true.
|
logical |
hmix_aniso_nml |
read_n2_data
Flag to use climatoligical N^2 data instead of model-dependent N^2.
Default: .false.
|
logical |
hmix_gm_nml |
slm_b
Maximum slope allowed for bolus transport.
Default: 0.3
|
real |
hmix_gm_nml |
slm_r
Maximum slope allowed for redi diffusion.
Default: 0.3
|
real |
hmix_gm_nml |
slope_control_choice
Choice for slope control.
Valid Values: 'tanh', 'notanh', 'clip', 'Gerd'
Default: 'notanh'
|
char*256 |
hmix_gm_nml |
smag_lat
Latitude at which to vary perpendicular Smagorinsky viscosity.
Default: 20.0
|
real |
hmix_aniso_nml |
smag_lat_fact
Coefficient of latitude-dependent Smagorinsky viscosity.
Default: 0.98
|
real |
hmix_aniso_nml |
smag_lat_gauss
Gaussian width of latitude-dependent Smagorinksy viscosity.
Default: 98.0
|
real |
hmix_aniso_nml |
time_scale_constant
Time scale constant in seconds -- must be between 1 and 4 days [86400 and 345600 seconds].
Default: 8.64e4 (1 day)
|
real |
mix_submeso_nml |
transition_layer_on
Flag for transition layer parameterization.
Default: .true.
|
logical |
hmix_gm_nml |
u_para
Velocity for grid Reynolds number viscous limit (parallel to alignment direction).
Default: 5.0
|
real |
hmix_aniso_nml |
u_perp
Velocity for grid Reynolds number viscous limit (perpendicular to alignment direction).
Default: 5.0
|
real |
hmix_aniso_nml |
use_const_ah_bkg_srfbl
Flag to use ag_bkg_srfbl as maxmium background horizontal diffusivity within the surface boundary layer (rather than using KAPPA_ISOP).
Default: .true.
|
logical |
hmix_gm_nml |
var_viscosity_infile
File name for variable viscosity factor.
Default: 'ccsm-internal'
|
char*256 |
hmix_aniso_nml |
var_viscosity_infile_fmt
var_viscosity_infile format (binary or netCDF).
Valid Values: 'bin', 'nc'
Default: 'bin'
|
char*256 |
hmix_aniso_nml |
var_viscosity_outfile
File for output of internally-computed viscosity.
Default: '$RUNDIR/$CASENAME.pop.hv'
|
char*256 |
hmix_aniso_nml |
var_viscosity_outfile_fmt
var_viscosity_outfile format (binary or netCDF).
Valid Values: 'bin', 'nc'
Default: 'nc'
|
char*256 |
hmix_aniso_nml |
vconst_1
1 of 7 coefficients for variable viscosity form. Units are cm^2/s.
Default: 0.6e7
|
real |
hmix_aniso_nml |
vconst_2
1 of 7 coefficients for variable viscosity form.
Default: 0.5
|
real |
hmix_aniso_nml |
vconst_3
1 of 7 coefficients for variable viscosity form.
Default: 0.16
|
real |
hmix_aniso_nml |
vconst_4
1 of 7 coefficients for variable viscosity form. Units are 1/cm.
Default: 2.e-8
|
real |
hmix_aniso_nml |
vconst_5
1 of 7 coefficients for variable viscosity form.
Default: 3
|
integer |
hmix_aniso_nml |
vconst_6
1 of 7 coefficients for variable viscosity form. Units are cm^2/s.
Default: 0.6e7
|
real |
hmix_aniso_nml |
vconst_7
1 of 7 coefficients for variable viscosity form. Units are degrees of latitude.
Default: 45.0
|
real |
hmix_aniso_nml |
visc_para
Viscosity parallel to alignment direction.
Default: 50.0e7
|
real |
hmix_aniso_nml |
visc_perp
Viscosity perpendicular to alignment direction.
Default: 50.0e7
|
real |
hmix_aniso_nml |
Namelist Variable |
Type |
Group |
ap_data_inc
Increment (in hours) between forcing times if ap_data_type='n-hour'.
Default: 1.e20
|
real |
forcing_ap_nml |
ap_data_renorm
Renormalization constants for the components in the atmospheric pressure forcing file.
Default: 20*1.
|
real(20) |
forcing_ap_nml |
ap_data_type
Type or periodicity of atmospheric forcing.
Valid Values: 'none', 'analytic', 'annual', 'monthly', 'monthly-equal', 'monthly-calendar', 'n-hour'
Default: 'none'
|
char*256 |
forcing_ap_nml |
ap_file_fmt
ap_filename format (binary or netCDF)
Valid Values: 'bin', 'nc'
Default: 'bin'
|
char*256 |
forcing_ap_nml |
ap_filename
Name of file containing atmospheric pressure forcing, or root of filenames if ap_data_type='n-hour'.
Default: 'unknown-ap'
|
char*256 |
forcing_ap_nml |
ap_interp_freq
How often to temporally interpolate atmospheric forcing data to current time.
Valid Values: 'never','n-hour','every-timestep'
Default: 'never'
|
char*256 |
forcing_ap_nml |
ap_interp_inc
Increment (in hours) between interpolation times if ap_interp_freq = 'n-hour'.
Default: 1e20
|
real |
forcing_ap_nml |
ap_interp_type
Type of temporal interpolation for atmospheric pressure forcing data.
Valid Values: 'nearest', 'linear', '4point'
Default: 'nearest'
|
char*256 |
forcing_ap_nml |
ladjust_precip
Adjust precipitation to balance water budget.
LANL Default: .false.
CESM Default: .true. if sfwf_formulation='partially-coupled', .false. otherwise
|
logical |
forcing_sfwf_nml |
lfw_as_salt_flx
Treat fresh water flux as virtual salt flux when using varthick sfc layer.
LANL Default: .false.
CESM Default: .true.
|
logical |
forcing_sfwf_nml |
lms_balance
Balance E, P, M, R, and S in marginal seas.
LANL Default: N/A, CESM only
CESM Default: .true. if sfwf_formulation='partially-coupled', .false. otherwise
|
logical |
forcing_sfwf_nml |
lsend_precip_fact
Flag for sending precip_fact to CESM coupler for use in fresh-water balance.
LANL Default: N/A, CESM only
CESM Default: .true. if sfwf_formulation='partially-coupled', .false. otherwise
|
logical |
forcing_sfwf_nml |
luse_cpl_ifrac
Flag to control use of fractional ice coverage.
LANL Default: N/A, CESM only
CESM Default: .true. if shf_formulation='partially-coupled', .false. otherwise
|
logical |
forcing_shf_nml |
pt_interior_data_inc
Increment (hours) between forcing times if pt_interior_data_type='n-hour'.
LANL Default: 1e20
CESM Default: 24
|
real |
forcing_pt_interior_nml |
pt_interior_data_renorm
Renormalization constants for components in interior potential temperature forcing file.
Default: 20*1.
|
real(20) |
forcing_pt_interior_nml |
pt_interior_data_type
Type or periodicity of interior potential temperature forcing.
Valid Values: 'none', 'annual', 'monthly', 'monthly-equal', 'monthly-calendar', 'n-hour'
Default: 'none'
|
char*256 |
forcing_pt_interior_nml |
pt_interior_file_fmt
pt_interior_filename format (binary or netCDF).
Valid Values: 'bin', 'nc'
Default: 'bin'
|
char*256 |
forcing_pt_interior_nml |
pt_interior_filename
File containing interior potential temperature data, or root of filenames if pt_interior_data_type='n--hour'.
Default: 'unknown-pt_interior'
|
char*256 |
forcing_pt_interior_nml |
pt_interior_formulation
|
char*256 |
forcing_pt_interior_nml |
pt_interior_interp_freq
How often to temporally interpolate interior potential temperature data to current time.
Valid Values: 'never', 'n-hour', 'every-timestep'
LANL Default: 'never'
CESM Default: 'every-timestep'
|
char*256 |
forcing_pt_interior_nml |
pt_interior_interp_inc
Increment (hours) between interpolation times if interp_freq='n-hour'
LANL Default: 1e20
CESM Default: 72
|
real |
forcing_pt_interior_nml |
pt_interior_interp_type
Type of temporal interpolation for interior potential temperature data.
Valid Values: 'nearest', 'linear', '4point'
LANL Default: 'nearest'
CESM Default: 'linear'
|
char*256 |
forcing_pt_interior_nml |
pt_interior_restore_file_fmt
pt_interior_restore_filename format (binary or netCDF).
Valid Values: 'bin', 'nc'
Default: 'bin'
|
char*256 |
forcing_pt_interior_nml |
pt_interior_restore_filename
Name of file containing variable interior potential temperature restoring data.
Default: 'unknown-pt_interior_restore'
|
char*256 |
forcing_pt_interior_nml |
pt_interior_restore_max_level
Maximum level for interior potential temperature restoring.
Default: 0
|
integer |
forcing_pt_interior_nml |
pt_interior_restore_tau
Restoring timescale (days) if pt_interior_formulation='restoring'.
LANL Default: 1e20
CESM Default: 365
|
real |
forcing_pt_interior_nml |
pt_interior_variable_restore
Enable variable interior potential temperature restoring.
Default: .false.
|
logical |
forcing_pt_interior_nml |
s_interior_data_inc
Increment (hours) between forcing times if s_interior_data_type='n-hour'.
LANL Default: 1e20
CESM Default: 24
|
real |
forcing_s_interior_nml |
s_interior_data_renorm
Renormalization constants for components in interior salinity forcing file.
Default: 20*1.
|
real(20) |
forcing_s_interior_nml |
s_interior_data_type
Type or periodicity of interior salinity forcing.
Valid Values: 'none', 'annual' ,'monthly', 'monthly-equal', 'monthly-calendar', 'n-hour'
Default: 'none'
|
char*256 |
forcing_s_interior_nml |
s_interior_file_fmt
s_interior_filename format (binary or netCDF)
Valid Values: 'bin', 'nc'
Default: 'bin'
|
char*256 |
forcing_s_interior_nml |
s_interior_filename
Name of file containing interior salinity data, or root of filenames if s_interior_data_type='n-hour'.
Default: 'unknown-s_interior'
|
char*256 |
forcing_s_interior_nml |
s_interior_formulation
|
char*256 |
forcing_s_interior_nml |
s_interior_interp_freq
How often to temporally interpolate interior salinity data to current time.
Valid Values: 'never', 'n-hour', 'every-timestep'
LANL Default: 'never'
CESM Default: 'every-timestep'
|
char*256 |
forcing_s_interior_nml |
s_interior_interp_inc
Increment (hours) between interpolation times if s_interior_interp_freq='n-hour'.
LANL Default: 1e20
CESM Default: 72
|
real |
forcing_s_interior_nml |
s_interior_interp_type
Type of temporal interpolation for interior salinity data.
Valid Values: 'nearest', 'linear', '4point'
LANL Default: 'nearest'
CESM Default: 'linear'
|
char*256 |
forcing_s_interior_nml |
s_interior_restore_file_fmt
s_interior_restore_filename format (binary or netCDF).
Valid Values: 'bin', 'nc'
Default: 'bin'
|
char*256 |
forcing_s_interior_nml |
s_interior_restore_filename
Name of file containing variable interior salinity restoring data.
Default: 'unknown-s_interior_restore'
|
char*256 |
forcing_s_interior_nml |
s_interior_restore_max_level
Maximum level for interior salinity restoring.
Default: 0
|
integer |
forcing_s_interior_nml |
s_interior_restore_tau
Restoring timescale (days) if s_interior_formulation='restoring'.
LANL Default: 1e20
CESM Default: 365
|
real |
forcing_s_interior_nml |
s_interior_variable_restore
Enable variable interior salinity restoring.
Default: .false.
|
logical |
forcing_s_interior_nml |
sfwf_data_inc
Increment (hours) between forcing times if sfwf_data_type='n-hour'.
LANL Default: 1e20
CESM Default: 24.
|
real |
forcing_sfwf_nml |
sfwf_data_renorm
Renormalization constants for components in sfwf forcing file.
LANL Default: 20*1.
CESM Default: 0.001, 19*1.
|
real(20) |
forcing_sfwf_nml |
sfwf_data_type
Type or periodicity of surface fresh water flux forcing.
Valid Values: 'none', 'analytic', 'annual', 'monthly', 'monthly-equal', 'monthly-calendar', 'n-hour'
LANL Default: 'analytic'
CESM Default: 'none' or 'monthly'
|
char*256 |
forcing_sfwf_nml |
sfwf_file_fmt
sfwf_filename format (binary or netCDF).
Valid Values: 'bin', 'nc'
Default: 'bin'
|
char*256 |
forcing_sfwf_nml |
sfwf_filename
Name of file containing surface fresh water flux data, or root of filenames if sfwf_data_type='n-hour'.
LANL Default: 'unknown_sfwf'
CESM Default: '$sfwf_filename', auto-filled by CESM scripts
|
char*256 |
forcing_sfwf_nml |
sfwf_formulation
|
char*256 |
forcing_sfwf_nml |
sfwf_interp_freq
How often to temporally interpolate surface fresh water flux data to current time.
Valid Values: 'never', 'n-hour', 'every-timestep'
LANL Default: 'never'
CESM Default: 'every-timestep'
|
char*256 |
forcing_sfwf_nml |
sfwf_interp_inc
Increment (hours) between interpolation times if sfwf_interp_freq='n-hour'.
LANL Default: 1e20
CESM Default: 72.
|
real |
forcing_sfwf_nml |
sfwf_interp_type
Type of temporal interpolation for surface fresh water flux data.
Valid Values: 'nearest', 'linear', '4point'
LANL Default: 'nearest'
CESM Default: 'linear'
|
char*256 |
forcing_sfwf_nml |
sfwf_restore_tau
Restoring timescale (days) if sfwf_formulation='restoring'.
LANL Default: 1e20
CESM Default: 30.
|
real |
forcing_sfwf_nml |
sfwf_strong_restore
Restoring flux for strong restoring in 'bulk-NCEP' and 'partially-coupled' formulation.
LANL Default: 0.6648
CESM Default: 0.0
|
real |
forcing_sfwf_nml |
sfwf_strong_restore_ms
Restoring flux for strong restoring over marginal seas in CESM 'bulk-NCEP' and 'partially-coupled' formulations.
LANL Default: N/A, CESM only
CESM Default: 0.6648
|
real |
forcing_sfwf_nml |
sfwf_weak_restore
Restoring flux for weak restoring in 'bulk-NCEP' and 'partially-coupled' formulation.
LANL Default: 0.092
CESM Default: 0.0115
|
real |
forcing_sfwf_nml |
shf_data_inc
Increment (in hours) between forcing times if shf_data_type='n-hour'.
LANL Default: 1e20
CESM Default: 24.
|
real |
forcing_shf_nml |
shf_data_renorm
Renormalization constants for the components in the surface heat flux forcing file.
LANL Default: 20*1.
CESM Default: (0.94, 19*1.)
|
real(20) |
forcing_shf_nml |
shf_data_type
Type or periodicity of surface heat flux forcing.
Valid Values='none', 'analytic', 'annual', 'monthly', 'monthly-equal', 'monthly-calendar', 'n-hour'
LANL Default: 'analytic'
CESM Default: 'monthly' if formulation is 'partially-coupled', 'none' otherwise
|
char*256 |
forcing_shf_nml |
shf_file_fmt
shf_filename format (binary or netCDF)
Valid Values: 'bin', 'nc'
Default: 'bin'
|
char*256 |
forcing_shf_nml |
shf_filename
Name of file containing surface heat flux data, or root of filenames if shf_data_type='n-hour'.
LANL Default: 'unknown-shf'
CESM Default: '$shf_filename', auto-filled by CESM scripts
|
char*256 |
forcing_shf_nml |
shf_formulation
|
char*256 |
forcing_shf_nml |
shf_interp_freq
How often to temporally interpolate surface heat flux data to current time.
Valid Values: 'never', 'n-hour', 'every-timestep'
LANL Default: 'never'
CESM Default: 'every-timestep'
|
char*256 |
forcing_shf_nml |
shf_interp_inc
Increment (in hours) between interpolation times if shf_interp_freq = 'n-hour'.
LANL Default: 1e20
CESM Default: 72.
|
real |
forcing_shf_nml |
shf_interp_type
Type of temporal interpolation for surface heat flux data.
LANL Default: 'nearest'
CESM Default: 'linear'
|
char*256 |
forcing_shf_nml |
shf_restore_tau
Restoring timescale (days) if shf_formulation='restoring'.
LANL Default: 1e20
CESM Default: 30.
|
real |
forcing_shf_nml |
shf_strong_restore
Restoring flux for strong restoring in bulk-NCEP
LANL Default: 92.64
CESM Default: 0.0
|
real |
forcing_shf_nml |
shf_strong_restore_ms
Restoring flux for strong restoring over marginal seas in bulk-NCEP
LANL Default: N/A, CESM only
CESM Default: 92.64
|
real |
forcing_shf_nml |
shf_weak_restore
Restoring flux for weak restoring in bulk-NCEP
Default: 0.
|
real |
forcing_shf_nml |
ws_data_inc
Increment (in hours) between forcing times if ws_data_type='nhour'.
LANL Default: 1e20
CESM Default: 24.
|
real |
forcing_ws_nml |
ws_data_renorm
Renormalization constants for the components in the wind stress forcing file.
LANL Default: 20*1.
CESM Default: 10., 19*1.
|
real(20) |
forcing_ws_nml |
ws_data_type
Type or periodicity of wind stress forcing.
Valid Values: 'none', 'analytic', 'annual', 'monthly', 'monthly-calendar', 'monthly-equal', 'n-hour'
LANL Default: 'analytic'
CESM Default: 'none'
|
char*256 |
forcing_ws_nml |
ws_file_fmt
ws_filename format (binary of netCDF)
Valid Values: 'bin', 'nc'
Default: 'bin'
|
char*256 |
forcing_ws_nml |
ws_filename
Name of file containing wind stress, or root of filenames if ws_data_type='n-hour'
Default: 'unknown-ws'
|
char*256 |
forcing_ws_nml |
ws_interp_freq
How often to temporally interpolate wind stress data to current time; value in namelist is ignored and value set to 'never' if ws_data_type is 'analytic', 'none', or 'annual'.
Valid Values: 'never', 'n-hour', 'every-timestep'
LANL Default: 'never'
CESM Default: 'every-timestep'
|
char*256 |
forcing_ws_nml |
ws_interp_inc
Increment (in hours) between interpolation times if ws_interp_freq = 'n-hour'.
LANL Default: 1e20
CESM Default: 72.
|
real |
forcing_ws_nml |
ws_interp_type
Type of temporal interpolation for wind stress data.
Valid Values: 'nearest', 'linear', '4point'
LANL Default: 'nearest'
CESM Default: 'linear'
|
char*256 |
forcing_ws_nml |
Namelist Variable |
Type |
Group |
cfc_formulation
|
char*256 |
cfc_nml |
cfc_on
Flag for using cfc module.
Default: 'Set by CESM scripts based on $OCN_TRACER_MODULES'
|
logical |
passive_tracers_on_nml |
data_year
Year in data that corresponds to model_year.
Default: 1850 for 1850-2000 transient run, 1981 otherwise.
|
integer |
cfc_nml |
ecosys_on
Flag for using ecosys module.
Default: 'Set by CESM scripts based on $OCN_TRACER_MODULES'
|
logical |
passive_tracers_on_nml |
gas_flux_ap%default_val
|
real |
cfc_nml |
gas_flux_ap%file_fmt
|
char*256 |
cfc_nml |
gas_flux_ap%file_varname
|
char*256 |
cfc_nml |
gas_flux_ap%filename
|
char*256 |
cfc_nml |
gas_flux_ap%mod_varname
|
char*256 |
cfc_nml |
gas_flux_ap%scale_factor
|
real |
cfc_nml |
gas_flux_fice%default_val
|
real |
cfc_nml |
gas_flux_fice%file_fmt
|
char*256 |
cfc_nml |
gas_flux_fice%file_varname
|
char*256 |
cfc_nml |
gas_flux_fice%filename
|
char*256 |
cfc_nml |
gas_flux_fice%mod_varname
|
char*256 |
cfc_nml |
gas_flux_fice%scale_factor
|
real |
cfc_nml |
gas_flux_ws%default_val
|
real |
cfc_nml |
gas_flux_ws%file_fmt
|
char*256 |
cfc_nml |
gas_flux_ws%file_varname
|
char*256 |
cfc_nml |
gas_flux_ws%filename
|
char*256 |
cfc_nml |
gas_flux_ws%mod_varname
|
char*256 |
cfc_nml |
gas_flux_ws%scale_factor
|
real |
cfc_nml |
iage_on
Flag for using iage module.
Default: 'Set by CESM scripts based on $OCN_TRACER_MODULES'
|
logical |
passive_tracers_on_nml |
init_cfc_init_file
Filename for initializing cfc (if init_cfc_option='file').
Default: 'same_as_TS'
|
char*256 |
cfc_nml |
init_cfc_init_file_fmt
init_cfc_init_file format (binary or netCDF).
Valid Values: 'bin', 'nc'
Default: 'bin'
|
char*256 |
cfc_nml |
init_cfc_option
Option for initialization of cfc.
Valid Values: 'ccsm_startup', 'zero', 'ccsm_startup_spunup', 'restart', 'ccsm_continue', 'ccsm_branch', 'ccsm_hybrid', 'file'
Default: Set by CESM scripts ('zero' for starting 1850-2000 transient run, 'ccsm_$runtype'otherwise)
|
char*256 |
cfc_nml |
init_iage_init_file
Filename for initializing iage (if init_iage_option='file').
Default: 'same_as_TS'
|
char*256 |
iage_nml |
init_iage_init_file_fmt
init_iage_init_file format (binary or netCDF).
Valid Values: 'bin', 'nc'
Default: 'bin'
|
char*256 |
iage_nml |
init_iage_option
Option for initialization of iage.
Valid Values: 'ccsm_startup', 'zero', 'ccsm_startup_spunup', 'restart', 'ccsm_continue', 'ccsm_branch', 'ccsm_hybrid', 'file'
Default: 'ccsm_$RUNTYPE'
|
char*256 |
iage_nml |
moby_on
Flag for using moby module.
Default: 'Set by CESM scripts based on $OCN_TRACER_MODULES'
|
logical |
passive_tracers_on_nml |
model_year
Arbitrary model year.
Default: 1850 for 1850-2000 transient run, 1 otherwise.
|
integer |
cfc_nml |
pcfc_file
File name for ascii time series of atm cfc11.
Default: '$DIN_LOC_ROOT/ocn/pop/res_indpt/forcing/pcfc1112_atm_20091117.nc'
|
char*256 |
cfc_nml |
tracer_init_ext%default_val
|
real |
cfc_nml |
tracer_init_ext%default_val
|
real |
iage_nml |
tracer_init_ext%file_fmt
|
char*256 |
cfc_nml |
tracer_init_ext%file_fmt
|
char*256 |
iage_nml |
tracer_init_ext%file_varname
|
char*256 |
cfc_nml |
tracer_init_ext%file_varname
|
char*256 |
iage_nml |
tracer_init_ext%filename
|
char*256 |
cfc_nml |
tracer_init_ext%filename
|
char*256 |
iage_nml |
tracer_init_ext%mod_varname
|
char*256 |
cfc_nml |
tracer_init_ext%mod_varname
|
char*256 |
iage_nml |
tracer_init_ext%scale_factor
|
real |
cfc_nml |
tracer_init_ext%scale_factor
|
real |
iage_nml |